SPX 11 GW B100 Bindings

Look positions the SPX 11 GW B100 binding at the intersection of advanced junior performance and smaller-framed adults seeking reliable retention without compromising safety. With a DIN release range of 3.5 to 11, it’s designed for dedicated skiers who are progressing toward a more technical and dynamic style of alpine skiing. This model’s promise rests on three key pillars: superior shock absorption to minimize unintended releases, direct power transfer, and multidirectional release designed for real-world fall scenarios. The Look SPX 11 GW B100 thus supports skiers in demanding conditions, whether they’re still developing their skills or are simply on the lighter side.

Release and Safety: Full Action Toe (FDC) and SPX Heel Piece

The SPX 11 GW B100’s release system is centered around a front toe piece known as the Full Action Toe (FDC), designed for 180° multidirectional release. This range of motion accommodates lateral, vertical, and combined forces, which correspond to the actual stresses experienced during a downhill skiing fall. The elastic travel of the front release mechanism reaches 45 mm, a generous value that absorbs shocks and vibrations before any release occurs, thereby reducing unwanted ski detachments when traversing difficult terrain.

The SPX heel piece complements this system with 27 mm of elastic travel and an oversized pivot. This pivot enhances power transfer between the boot and the ski, resulting in a more precise response during weight shifts. The front stop height is 14 mm, the heel piece height is 19.5 mm, and the binding’s length adjustment range is 45 mm. Installation and DIN setting must be performed by a professional, who will determine the appropriate settings based on the skier’s weight, height, sole length, and skill level.

Sole Compatibility: Alpine ISO 5355 and GripWalk

The Look SPX 11 GW B100 supports two distinct sole standards, which significantly broadens its range of use. Boots equipped with Alpine ISO 5355 A soles—the traditional standard for alpine skiing—are fully compatible. The binding also accepts GripWalk ISO 23223 A soles, a standard designed for soles with a rounded profile that facilitate walking, which are becoming increasingly common on modern ski boots. This dual compatibility must be carefully verified during installation: only these two standards are approved for this model; any other sole standard cannot be used without compromising safety.

Regarding the brake, the B100 version is equipped with a 90–100 mm brake. This ski brake is suitable for skis with a waist width within this range; the brake must extend slightly beyond the ski’s waist to ensure proper retention.

Construction and Performance: Rolling Control Technology and Optimized Weight

The binding incorporates Rolling Control technology, which optimizes power transfer between the boot and the ski by ensuring continuous and effective contact throughout the flex cycle. This approach contributes to precise handling, particularly during aggressive turns where the ski’s responsiveness depends directly on the quality of the binding-boot connection. The SPX 11 GW B100 weighs 1,110 g per half-pair, a figure consistent with the level of durability expected for a binding in this DIN range.

The Look SPX 11 GW B100 is a solid choice for an advanced junior skier or a smaller adult looking to improve on varied terrain with a binding that offers solid retention and a proven multidirectional release. Its dual compatibility with both Alpine and GripWalk soles provides useful versatility when selecting boots, provided that the binding is installed by a qualified technician.